The multi-channel melt gear pump provided by Zhengzhou Batte is mainly used for polyester melt transportation, because the polyester melt extrusion system has high requirements on the melt transportation device: under high temperature and high pressure, it can transport high viscosity polyester melt. Body; The outlet flow is stable and the flow uniformity is good. General types of gear pumps cannot meet the delivery requirements of polyester melt extrusion systems due to their own defects. The multi-channel melt gear pump is designed on the basis of the general type gear pump, which can meet the high delivery requirements of the polyester melt extrusion system for the delivery device.
The multi-channel melt gear pump adopts a driven gear structure to balance the radial force. The driven wheel is evenly distributed relative to the driving wheel, so that the hydraulic pressure and meshing force around the driving wheel are respectively balanced, thereby effectively reducing the load of the pump shaft and bearing, and improving the life of the gear pump. Because the gap between the driving wheel and the pump body is extremely small, a separate external gear pump is formed approximately between the driving wheel and each driven wheel. The total inlet of the pump is connected, and the outlets are independent, thus forming four Parallel driven gear pumps. Multi-channel melt gear pump price consultation info@battemachinery.com
Previous：The details of the daily maintenance of the seal of the plastic sheet melt pump