Introduction of reactor melt discharge pump
Polymer melt pump for reactor kettleis mainly used for transporting medium or high viscosity medium out of the vacuum reaction kettle. On basis of large suction inlet flange design, the high viscosity medium is able to absorb inside under vacuum conditions. This series of polymer gear pump is primarily applicable for ABS, PS, PET, PC, SAN, PP, PE Bioploymers etc.

Get more informations and price list !!!

Technical Parameter of melt pump for reactor
◆ China Reaction Kettle Melt Pump Body: stainless steel, carbon steel, hastelloy, monel

◆ Gear: tool steel, nitrided steel, special material and wear-resistant coating
◆ Tooth profile: Straight tooth, Helical tooth, Herringbone tooth
◆ Sliding Bearing: tool steel, Ti-Ta alloy, silver-nickel, special material and wear-resistant coating
◆ Shaft Sealing: mechanical seal, Screw sealing+Packing seal, flushing fluid combined sealing
◆ Heating System: Electrical heating

 

Operating Parameter of Melt pump for reaction rubber melting kettle 
◆ Theory: Positive Displacement Gear Pump
◆ Structure: Gear Pump
◆ Usage: Plastic, Rubber Pump and Fiber
◆ Power: Electric or Oil
◆ Fuel: No Need
◆ Volume Range: 0.5CC-30000CC
◆ Viscosity: ≤40000 Pas
◆ Working Temperature: ≤400°C(750°F)
◆ Cleaning Temperature: ≤450°C(850°F)
◆ Inlet Pressure: Vacuum--1.5MPa
◆ Outlet Pressure: 40Mpa

Application of reactor kettle melt pump
◆ Polymer extrusion molding, such as granulation, film, pipe, plate, sheet, etc;
◆ High-viscosity materials such as PC, PMMA, ABS, HIPS, PET, PVB, PS, PP, PA, PE, PVA .etc;
◆ Rubber, asphalt, paint, adhesives, coatings, lubricants, polyalcohol, non-particulate impurities;
◆ Polyester for cotton-fiber, polypropylene and other chemical fiber melt.

Structure of melt gear pump for reactor

Get more electric heating reaction kettle melt pump informations and price list !!!

Parameters of melt pump for reaction kettle

Type	CC/Rev	Capacity (L/H)	Heating power (kw)	Dirven system (kw)	Pressure	Temperature
ZB-0.2	0.2	0.2-0.6	0.5	0.37	Inlet pressure:≥0Mpa Exit pressure: ≤35Mpa	Operating temperature:≤350℃ Clearing temperature:≤450℃
ZB-1	1	1-3	1	0.5
ZB-2	2	2-6	1	0.75
ZB-5	5	5-15	1	1.1
ZB-10	10	10-30	1	1.5
ZB-20	20	20-60	2	2.2
ZB-31.5	31.5	30-90	2	3
ZB-50	50	50-150	2	4
ZB-100	100	100-300	3	5.5
ZB-150	150	150-450	4	7.5
ZB-200	200	200-600	4	11
ZB-250	250	250-750	5	15
ZB-315	315	300-900	6	18.5
ZB-400	400	400-1200	8	22
ZB-500	500	500-1500	10	30
ZB-630	630	600-1800	12	37
ZB-800	800	800-2400	15	45
ZB-1000	1000	1000-3000	18	55
ZB-1500	1500	1200-4500	20	75

The above parameters are standard values, and specific requirements can be customized. For example, all parts melt pump of 70cc can be customized.

Get more polymer gear melt reaction kettle pump informations and price list !!!

ZB-K Polymer melt pump for reaction kettle.pdf

Zhengzhou BATTE chinaplas

Get more informations and price list !!!

Zhengzhou BATTE melt pump factory

batte melt pump part of the processing equipment in the workshop

Zhengzhou Batte Melt Pump Co., Ltd. is a professional manufacturer of polymer melt pumps, screen changers and feeders integrating R&D and production. Located in the University Science and Technology Park of Zhengzhou High-tech Industrial Development Zone, it relies on the scientific research strength of domestic universities and combines European advanced technology and quality control concepts to integrate production, learning and research. Especially in the application technology of melt pump, has accumulated rich experience. Continuous in-depth research on the working principle, performance optimization, equipment structure optimization, control technology and other aspects of the melt pump has achieved considerable results, and has been recognized and praised by the vast majority of users in the industry. 

Email: info@battemachinery.com

Whatsapp: +86 158 38331071

Previous：ZB-D series pipeline melt pump for polymer
Next：ZB-R series gear melt pump for rubber extruder