Introduction of high temperature booster melt pumps:
High temperature booster melt pump is used for transportation, pressurization or the metering of the high temperature and high viscosity polymer melt.This melt pump is applicable for engineering plastic or blown film technique.
High pressure polymer melt pump have a unique positive displacement design which provides consistent, accurate polymer delivery under varying extruder output conditions of pressure, temperature and viscosity. With melt pump providing the pressure between the extruder and the die, extruder parameters can be configured to provide a homogeneous melt at increased throughout and tighter gauge tolerances.

Get more informations and price list !!!

Application of pressure-stabilizing melt pump:
◆Polymer extrusion molding, such as granulation, film, pipe, plate, sheet, etc;
◆High-viscosity materials such as PC, PMMA, ABS, HIPS, PET, PVB, PS, PP, PA, PE, PVA .etc;
◆Rubber, asphalt, paint, adhesives, coatings, lubricants, polyalcohol, non-particulate impurities;
◆Polyester for cotton-fiber, polypropylene and other chemical fiber melt.

Technical Parameter of melt booster pump manufacturer:
◆Melt Pump Body: CPM stainless steel, Ti-Ta alloy
◆Gear: CPM stainless steel, Ti-Ta alloy, special material and wear-resistant coating
◆Sliding Bearing: CPM stainless steel, Ti-Ta alloy, special material and wear-resistant coating
◆Shaft Sealing: Screw sealing
◆Heating System: Electrical heating

Operating Parameter of polymer processing melt pump:
◆Theory: Positive Displacement Gear Pump
◆Structure: Gear Pump
◆Usage: Plastic, Rubber Pump and Fiber
◆Power: Electric or Oil
◆Fuel: No Need
◆Volume Range: 1.3CC-12000CC
◆Viscosity: ≤20000 Pas
◆Working Temperature: ≤510°C(950°F)
◆Cleaning Temperature: ≤590°C(1100°F)
◆Outlet Pressure:≤70Mpa
◆Differential Pressure: ≤50Mpa

Get more informations and price list !!!

Structure of High temperature polymer processing melt pump:

Get more informations and price list !!!

Parameter of High temperature measure melt gear pump:

Type	CC/Rev	Capacity (L/H)	Heating power (kw)	Dirven system (kw)	Pressure	Temperature
ZB-0.2	0.2	0.2-0.6	0.5	0.37	Inlet pressure:≥0Mpa Exit pressure: ≤35Mpa	Operating temperature:≤350℃ Clearing temperature:≤450℃
ZB-1	1	1-3	1	0.5
ZB-2	2	2-6	1	0.75
ZB-5	5	5-15	1	1.1
ZB-10	10	10-30	1	1.5
ZB-20	20	20-60	2	2.2
ZB-31.5	31.5	30-90	2	3
ZB-50	50	50-150	2	4
ZB-100	100	100-300	3	5.5
ZB-150	150	150-450	4	7.5
ZB-200	200	200-600	4	11
ZB-250	250	250-750	5	15
ZB-315	315	300-900	6	18.5
ZB-400	400	400-1200	8	22
ZB-500	500	500-1500	10	30
ZB-630	630	600-1800	12	37
ZB-800	800	800-2400	15	45
ZB-1000	1000	1000-3000	18	55
ZB-1500	1500	1200-4500	20	75

 

The above parameters are standard values, and specific requirements can be customized. For example, all parts melt pump of 70cc can be customized.

Get more informations and price list !!!

 ZB-H High temperature and high pressure melt pump.pdf

Zhengzhou BATTE chinaplas

Get more informations and price list !!!

Zhengzhou BATTE melt pump factory

batte melt pump part of the processing equipment in the workshop

Zhengzhou Batte Melt Pump Co., Ltd. is a professional manufacturer of metering melt pumps, screen changers and feeders integrating R&D and production. Located in the University Science and Technology Park of Zhengzhou High-tech Industrial Development Zone, it relies on the scientific research strength of domestic universities and combines European advanced technology and quality control concepts to integrate production, learning and research. Especially in the application technology of melt pump, has accumulated rich experience. Continuous in-depth research on the working principle, performance optimization, equipment structure optimization, control technology and other aspects of the melt pump has achieved considerable results, and has been recognized and praised by the vast majority of users in the industry. 

Email: info@battemachinery.com

Whatsapp: +86 158 38331071

Previous：ZB-R series gear melt pump for rubber extruder
Next：ZB-E series transfer melt pump for extruder