To ensure product quality, one or more sets of melt pumps and filters are generally used in the production line of cast film and laminated film. Studying their
learn more >To ensure product quality, one or more sets of melt pumps and filters are generally used in the production line of cast film and laminated film. Studying their
learn more >
PET extruded sheet is widely used in the field of vacuum blister molding: food and beverage food packaging, toy boxes, stationery boxes, gift boxes and tools, f
learn more >
PP thermoforming sheet is currently the most widely used and largest sheet in domestic positive pressure thermoforming, even in the whole family of thermoformin
learn more >The simplest ways to make the best of extrusion melt pump function installing into extruders, Melt pumps is known as an accurate metering device that build pressure more effectively than a screw and provide more consistent pressure and volume of output than a screw, eliminates surging of the extruder screw. The extruder fills the gears from the suction side and the rotating gears discharge the polymer on the other side. it is to keep the flow and pressure of the plastic melt flow to the die at a continuous and constant level, reduces back pressure and increases output of the complete line (up to 20%). The quality of the extruded material is thus highly increased. It is used in a wide range of applications from PET sheet and rubber extrusion to recycling and compounding.
1, improve the quality of the final products
2,greatly improve the plasticizing of the raw material
3, make the product structure more homogeneous and product surface smoothness
4, protect the down stream equipments, such as Batte melt pumps and the extrusion dies
1, to improve the stability of the product size
2,melting quality control
3, increase output
4, reduce the raw materil consumption
5, improve the flexible of the extruder
6, protect the extrusion die ,extend the service life of the extruder
1, improve the melt plasticaction
2, improve the quality of the products
3, extend the service life of the extruder
4, greatly increase the output of the products
5, reduce the labor interference
6, reduce the unqualified products
1, we should operate the screen changer and melt gear pump as the safety manual, prevent an electrical shock
2, To prevent ourself scald
3, do not disassemble the screen changer and the melt gear pump, any questions, please contact with the supplier.
Polymer Melt
film, pipe, plate, sheet, granulation
High Temperature or High Viscosity Materials
PC, PMMA, ABS, HIPS, PET, PVB, PS, PP, PA, PE, PVA PET,etc.
Chemical Fiber Melt
polyester for cotton-fiber, polypropylene
Other Polymer Melt Materials
rubber, asphalt, paint, adhesives, coatings, lubricants.
