The torque between the melt gear pump and the motor is transmitted through a cross shaft universal joint. Due to its large angle compensation ability, the cross shaft universal joint has a compact structure, smooth operation without noise, strong load-bearing capacity, and a torque of over 6000KN · M. It is used for high-power transmission, with obvious energy-saving effects and is widely used. When selecting a universal coupling for polymer melt conveying gear pumps, the following points should be noted

1. It is necessary to clarify the size and category of the transmitted load: whether it is a unidirectional constant load, pulsating load, or bidirectional alternating load, and the specific operating condition coefficients;

2. Work environment: whether there are adverse environmental conditions such as high temperature, dust, water immersion, chemical corrosion, and short maintenance cycles;

3. On site installation conditions: Are there any restrictions on the installation location and the specific installation length;

4. What is the rotational speed of the universal joint itself and whether dynamic balancing is required.

Zhengzhou Batte Melt Pump Co., Ltd. is a professional supplier of melt gear pumps that can meet the transportation, metering, and pressurization of polymer melts with different viscosities. We provide specifications and models of melt gear pumps ranging from 0.2cc/r to 20000cc/r.

Email: info@battemachinery.com

WhatsApp: +86 158 38331071

Previous：Talk about biodegradable melt pump together
Next：Steps in the use of melt pumps